DRI WASH 'n GUARD® ULTRA-ION™ - Introducing next generation vehicle appearance technology. Newly enhanced to work on paints of ALL car models & years and beyond. It's Ionic Technology not only helps repel dust from your vehicle's surface, but also helps reduce and remove existing minor feather scratches. As you apply and buff the painted surface, you'll be amazed at the results. DRI WASH 'n GUARD® ULTRA-ION™ will give a deeper, richer shine than any other product in the vehicle appearance industry. It is extremely aggressive in emulsifying all organic matter as well as bugs, bird droppings and tar and it works exceptionally well on glass, mirrors and chrome! DWG ULTRA-ION™ can be applied to dark colors in any natural occurring heat from the sun.
It is extremely important that DRI WASH 'n GUARD® ULTRA-ION™ be applied with a DRI WASH 'n GUARD® Car AIRosol pump sprayer only. Use on hard, non-porous surfaces only. Pre-test on inconspicuous area before use. Can be used over surface containing moderate level of dust, dirt, road grime or salt.
Refill Procedures:
- Unscrew collar nut at neck of AIRosol pump sprayer and remove internal spray mechanism
- Invert bottle of product, shake vigorously for 15-20 seconds
- Pour contents into AIRosol pump sprayer until 75% full
- Re-Install spray mechanism and collar nut
Directions By Hand:
1. Apply Dri Wash 'n Guard® ULTRA-ION™ to a cool, dry surface in a shaded area. Avoid windy conditions if possible.
2. Use two soft, clean micro-fiber towels... one for applying the product and one for buffing. Invert the AIRosol pump sprayer and shake vigorously for 15-20 seconds.
3. Pressurize the bottle by pumping the cap "up and down" until a strong resistance is felt (approx. 10-15 times).
4. Spray a light coat of Dri Wash 'n Guard® ULTRA-ION™ on a small section of vehicle (2-3 sq. ft.), spraying with a broad sweeping motion where possible.
5. Using the application towel, with moderately firm pressure, massage polish thoroughly over the sprayed area until the filmy haze that developed almost disappears.
6. Buff the remaining haze to a high gloss with the DWG buffing towel
For questions or to reorder contact:
Terry and Susan Dilleshaw
Divisional Coordinators, PIN 267529
916-725-1368 or 916-705-7595
Fax 916-735-8506
No comments:
Post a Comment